Detached Leg Spring is also known as: Detached Leg Spring | Fishback Spring | Fish Back Spring.Large heavy load geometry that provides a heavy load over a wide deflection range and is used in dynamic and static applications. The Detached Leg Spring is available in five standard sizes in the 301 SS Material and available in four standards in the Elgiloy material. This spring is produced in continuous lengths. Free height diamention range from .386″ to 1.120′. 

Full Contact Spring is also known as: Raco Spring | Continuous Contact Spring. The Full Contact spring, also called FC spring, can withstand the highest load and maintains a higher deflection range than the Helical spring. Continuous ribbing along the outer edge allows it to energize the seal while also acting as an added structural component inside the seal, which allows it to fight the thermal contraction of the seal jacket when exposed to extreme temperatures. Due to its configuration, the Full Contact spring can only be used in axial applications. 

Cantilever U Spring is also known as: U Spring | Cantilevered U Spring | Meander U Spring | Meander Springs. The U-Spring is a versatile spring energizer that can be used in multiple applications. It is considered the standard for spring energizers. It is widely used to assist in sealing applications for oil and gas due to its greater deflection range and the fact that it can be produced using Elgiloy (a non-corrosive material). This spring generally withstands temperatures ranging from -75 to 500 F and pressures above 30,000 psi, making it a great option for many sealing applications.

Canted Coil Spring is also know as: Slant Coil Spring, Wire Wound Spring, Wound Spring, Slant Coil, Slant/Canted Coil Spring. The V-Spring is a versatile spring energizer that can be used in multiple applications. It is considered the standard for spring energizers. It is widely used to assist in sealing applications for oil and gas due to its greater deflection range and the fact that it can be produced using Elgiloy (a non-corrosive material). This spring generally withstands temperatures ranging from -75 to 500 F and pressures above 30,000 psi, making it a great option for many sealing applications.

Canted Coil Spring is also know as: Slant Coil Spring, Wire Wound Spring, Wound Spring, Slant Coil, Slant/Canted Coil Spring.The Slant Coil spring is one of our more unique spring types. It has a flat load to deflection curve which means that the force emitted stays constant over a wide deflection range. This feature makes it perfect for high-speed rotary systems or applications which require tight control of running friction or breakout. It may also be used within devices that require a quick disconnect where many engagement and disengagement cycles are necessary. 

Helical Spring is also known as: Wound Spring, Wound Spring, Ribbon Spring. The Helical spring is made from flat ribbon stainless steel and other alloys wound into a round cross section helix geometry. The H Series is for use in U-Cup seals and other components as a radial or axial compression energizer and produces a very high unit load over a small deflection range. Normally used in static or slow dynamic applications and often when very low temperatures are present, the H Spring is available in five standard sizes and can be ordered by the foot or cut and welded to specific diameters.